Hellvape Grimm Kit review + Videos | Among the MTL best AiO vape kits on the market 2020 | Unique...
If you want to see more recently anonounced and/or launched great vaping devices, be sure to check out our MTL Vaping News Section. 😉
This is the Section in which we’d try and present you all the (sometimes DTL but mostly) new MTL best vape kits (e.g. Pod Systems, AiOs, Cigalikes and Box Mod kits) announced or launched during the previous week.
MTL means Mouth To Lung vaping whereas DTL means Direct To Lung vaping, by the way.
If you’re not sure what this refers to, exactly, you can read our article explaining thoroughly what these two types of vaping are.
This week is just an ok week in terms of announcements and/or launches of (MTL) vaping devices, just slightly better than the last one. Few vaping kits stand out. But those who do, don’t do it halfway. We found some that should definitely interest you because of their design, innovations and/or versatility.
So, the 5 New MTL Best Vape Kits we’ll present you this week are:
The VenVii FITT-2 Pod System, GoForVape Satisfy AiO kit, Innokin MVP5 Box Mod (kit) + the Kdest Armor All in One and the VEIIK Cracker Pod Kit (these last two barely made the cut but they’re nice and tiny and could appeal to those who like a looser draw).
Also, and as always, we’ve carefully looked for the lowest prices and best deals for the devices we present, here, in this new MTL “best vape kits of the week” Section.
Because pre-ordering can be synonymous of great deals too.
But remember that, obviously, prices are subject to change. These are the prices we found at the time of writing this article.
Ok, let’s get this presentation of these new (Direct to Tung but mainly) MTL best vape kits of the week started.
What is the first one we want to talk to you about?
Today, we begin our DTL / MTL Best Vape Kits Of The Week Section with a UVO (Unidentified Vaping Object) 😀.
The design of the Venvii FIIT-II Pod System is absolutely unique. So unique, in fact, that we don’t know what to compare it to.
It may kinda look a bit like a high-end computer mouse… Or a mini laser weapon from the future. How should we call it? The Mouse Pod or The Laser Kit? LOL.
We could try and compare it to what was known as the Envii FITT Pod System.
It was in fact, and this is an anecdote, definitely the “Venvii FIIT”. But the logo that was supposed to act as a V and, thus, as the first letter of the brand name on the packaging, was only seen as a logo above the brand name.
Thus, it was not recognized as a “V”. So, almost no one caught on the brand’s real name and thought it was Envii. So, if you do a YouTube search for “Venvii FiiT”, you’ll find 80% of results are either for the “Envii FiTT” or the Venvii FiTT 2 (at the time of the writing of this article, there are none yet, but they will surely appear). While this happens more on YouTube, if you search on Google, it will even ask you if you meant Envii FiTT, LOL. But you’ll still find results for its proper name.
Anyway, the Venvii FiTT 2 Pod System doesn’t look remotely like the FiTT, first of its name.
You know what? There’s no need to try and compare it to anything. The Venvii FITT-II looks are surprising, different and futuristic. You decide if it looks good to you.
It’s an eye catcher and, thus, will attract attention, that’s for sure.
The red or the orange ones… LOL, yeah, they will definitely stand out.
You can watch a short video of it published on Instagram.
The Venvii FiTT 2 design is not the only thing that makes it stand out compared to the other Pod Systems on the market. Granted, it would have made our MTL Best Vape Kits Of The Week list on its design alone, but the Venvii FiTT 2 has something more to offer.
It’s the first vape kit to be launched with a Honeycomb ceramic coil design.
[NB: It’s one of Venvii’s own presentation slides for the Venvii FiTT 2 kit in English. So, don’t blame us for the translation. LOL]
This is a new coil technology that we’ll let DJLsb Vapes present you.
So, a beautiful (for us), unique and attention-grabbing design, a new coil technology… no wonder we’ve chosen the Venvii FiTT 2 Pod System to be among our (few) New MTL Best Vape Kits Of The Week, right?
What else should you know about it?
It has a more than decent (for a Pod System) 650mAh battery.
Thanks to the 1-1.2ohm coils it works with it should last you a work day as long as you’re not a chain vaper (taking multiple puffs in a row and often). And its pods have a 2ml e-liquid capacity.
Obviously, the Venvii FiTT 2 Pod kit also has all the protection needed to operate it safely. If we almost never mention this, it’s because all the vape kits we present you are supposed/declared to have all the security protections needed and more.
Venvii FiTT 2 Full Specifications And Features List.
Dimensions: 90 x 39 x 21mm
Pod Capacity: 2ml
Battery Type: Built-in 650 Battery
Coil Resistance: 1.0~1.2ohm (Ceramic)
LED indicator displays battery status
Honeycomb Ceramic Coil Design
Easy refilling system
Output Short Circuit Protection
Low Voltage Protection
Now, what’s next on our New MTL Best Vape Kits list today?
GoForVape is not a very well-known company. We’ve never heard of them before. And the GoForVape Satisfy is the first AiO kit they’ve created. But it still makes it in our DTL / MTL Best Vape Kits Of The Week Section.
This GoForVape Satisfy AiO looks very interesting for several reasons. You’ll see why in a minute.
Before the Satisfy AiO kit, GoForVape made a Box Mod kit (the Mazu), and a couple of unremarkable Pod Systems, the Paras I and II.
[NB: The Paras 3 should launch soon and looks like a sleek stick Pod System but we don’t have enough info on it yet to know if it’s worthy of being presented to you or not.]
They also made 2 tanks, the Eternal RDA tank and one suitable for both MTL and DTL they’ve just launched recently, the Double Up RTA.
But, more noticeably, they’ve created the first clapugatted coils and will use them in their new Direct To Lung (DTL) Emperor tank.
Don’t ask us what “clapugatted” means, we don’t know. What we know is that it’s a patented technology that looks like a set of very small wires stack (with some space in-between) upon each other and put inside a ceramic wick. But don’t quote us on that. We don’t know for a fact that the wicking material is ceramic.
It’s a very interesting tech nonetheles.
But, from what we understand, the patent pertains to the enclosure around the coil. Not really (or not only?) the heating mechanism. It’s about the airflow and the e-liquid delivery system.
Anyway, these “clapugatted” coils allow for an increased surface area (like mesh coils do but with a perforated mesh film) and immediate heating of the e-liquid to improve the reactivity of the coils and their flavor reproduction.
Why do we speak about this coil technology? Because soon, they will be available as an option in 2 of the 3 GoForVape Satisfy AiO subohm coils.
In total, four different replaceable coils will be available for the GoForVape Satisfy AiO, as well as one RBA coil.
FIVE COIL Options in total.
With the OBS Alter kit, The GoForVape Satisfy AiO has the most different coils options specifically created for one device on the market.
Right there, you already have 2 of the main reasons why it’s among our DTL / MTL Best Vape Kits Of The Week.
Another new patented coil technology (yep, two different and new coil techs announced in a product the same week) and 5 coil options for one AiO, impressive right?
Ok, we don’t really care about these clapugatted coils since they’re not intended for MTL vaping (though, the tech could be adapted to MTL coils in the future) but innovation is always a good thing and we know many DTL vapers read us too. Hi, Guys 😉.
So, the GoForVape Satisfy kit 5 coil options will be:
– Two different clapugatted coils (0.25 and 0.35ohm)
– One 0.6ohm mesh coil that could be suitable for both DTL and, with the airflow closed down, for Mouth To Lung vaping.
– One MTL 1.2 regular wire coil (we don’t know what type of wire they’ll use yet).
And an RBA section.
What else does the GoForVape Satisfy AiO have to offer?
First, and we think you’ll agree, a sleek and stylish design.
The polished aluminum, two-tone casing, the resin-looking drip tip and the stylized e-liquid window all make it look good.
Then, its features and specifications:
– 1300mAh battery
– 1A USB-C charging
– A nice OLED screen
– Adjustable power with a 50W max output
– Easy top filling mechanism.
The drip tip is not 510-compatible. It’s essentially a sleeve that you take off to reveal the filling hole. So, a CON for the drip tip not being a 510 but a PRO for the easy top filling mechanism.
Speaking of filling, the GoForVape Satisfy kit has a 4ml capacity e-liquid tank/pod. That’s rather a big capacity.
One other CON for us is, as you can see on the picture above, the fire button placement. It’s on the opposite side of the drip tip and low on the body of the GoForVape Satisfy kit. So, two cons in one.
You will understand why we think it’s a CON to place the fire button on the opposite side of the mouthpiece by reading our rant on the topic. It being low just accentuates the inconvenience.
Plus, if you read our presentation of the THC Tauren X, you’ll realize it may also hinder your (chain) vaping experience.
Beside the positioning of the fire button, the only other potential con is the top airflow control situated on the drip tip.
We’ve expressed the same concern about the upcoming sophisticated Vaporesso Degree Pod System, but a top airflow can make the vape a bit cooler and shallower if the air is simply added at the end of the path the vapor takes, just before we inhale it.
We don’t know if the GoForVape Satisfy kit top airflow will direct the air all the way down to the coil for it to use the same path as the vapor before coming back up through the mouth piece again. But what we know is that it can be completely closed. So, it should be fine… for MTL vapers at least.
To be frank, these are minor concerns. The SnowWolf Wocket also has the fire button on the opposite side of the drip tip and an adjustable top airflow. But it’s still, along with the Pal 2 Pro, the best AiO for MTL vaping for us at the moment. But, as always, we try to be as thorough and as honest as possible.
[NB: It’s not exactly the same situation since the Wocket also has an airflow ring attached to the coil – so, a second and more appropriate way of controlling the airflow.]
To conclude our preview of this GoForVape Satisfy AiO kit:
Even though GoForVape isn’t a very well-known company, at least in the vaping kit market, their Satisfy All in One kit seems to not only fulfill all the requirements to be considered as a good AiO kit but also, and easily, be one of the best DTL / MTL vape kits we wanted to present you this week. It may even, with all its options and its sleek design, be a contender for the MTL best vape kit of the year award. You tell us.
Now, something a bit different:
In fact, instead of the Innokin MPV5 + DTL Ajax tank kit, we could make our own MTL one. We could use the Innokin MPV5 in combination with the new, 4ml and 24mm in diameter, Zlide tank ($20) and create a great matching kit. I.e. by choosing a Zlide tank which (drip tip) color is either the same as the box or has the same color as the triangle in its center. Maybe we’ll do that, LOL.
[NB: If you’re a Direct To Lung vaper, you can always purchase the whole Innokin MVP5 kit with the Ajax Tank. ($79.49) The following will briefly describe the Innokin MVP5 Box Mod and the Zlide/Zenith tanks]
For those who don’t know it, the Innokin Zlide tank (2 or 4ml capacity) with its older brother the Zenith is the best MTL tank on the market today, in our opinion. Great flavors and very good production of dense and warm vapor. All this at a low wattage (around 14W is our sweet spot with the 0.7ohm Z-Coils.)
Plus, it can easily be coupled with the Innokin MVP5 Box Mod since the latter has a pre-set mode made especially for it. You can see it in the settings in the picture below.
The Zenith and Zlide tanks function at the same power range and perform similarly. And, as they both use Z-Coils, the “Zenith” mode will suit them both with no issue.
Once in that mode, the Innokin MVP5 Mod will automatically detect the resistance of the Z-coil you have in your (Zenith or Zlide) tank and adjust the minimum and maximum wattage for this specific type of coil. It does the same with the Ajax tank.
The Innokin MVP5 Box Mod is a good looking yet tough zinc alloy box mod. It has an enormous 5200mAh battery with 2A fast charging. It can act as a power bank and charge almost any device that has a USB port.
It’s a rugged box mod built to last and can be used while enjoying outdoor activities.
It’s water resistant, shock resistant and dust resistant.
It has a flashlight featuring 6 modes (Max, Mid, Min, SOS, Beacon, Strobe) for the adventurers among you… or those who need to open a (car) door at night.
A bit gimmicky but a real powerful flashlight on a device you almost always have on you beats the screen of your phone acting as one.
It even has a compass, a thermometer, a barometer and an altimeter. We kid you not.
It’s the Swiss Army knife of Box Mods.
Innokin MVP5 Box Mod Full Specifications List:
Size: 53 x 95 x 27mm
Battery Type: Integrated 5200mAh Battery
Max Wattage Output: 120W
Nickel/ Titanium / Stainless Steel Wire Compatibility
Intuitive Firing Button
Triple Adjustment Buttons
OLED Display Screen
3 Power Levels: Normal / Soft / Boost
Temperature Range: 300~600’F
4 Memory Slot Curve
Altimeter – Altitude Measure
Barometer – Atmospheric Pressure Measure
Flashlight – 6 Operating Profiles
Micro-USB Type-C Port
Innokin MVP5 Box Mod comes with:
Why is the KDEST ARMOR Pod System Kit in this this Best Vape Kits Of The Week article?
Basically, for one single reason. This is the first All in One kit sporting a removeable 14500 battery. It’s a 1000mAh battery, by the way.
We’ve seen AiOs with removable 18650 batteries before but never a 14500 one.
Kdest being a Chinese battery manufacturer first and foremost (we believe the Armor is their first vaping device), maybe it has a stock of 14500 batteries it can’t sell, and decided to make a vaping device around them, LOL. Jokes aside, it’s a good idea because it allows to have a significant (removable) battery capacity in such a small device. It’s only 7cm (less than 3inch) high.
Kdest emphasizes the fact that there’s a Kdest branded battery in its Armor but you should be able to put any 14500 battery in there. You can find this type of batteries on e-Bay or Amazon.
The Kdest Armor full dimensions are: 71 x 49 x 29mm. Basically, 3inch by 2 by 1. Very compact.
It’s small, its design isn’t bad at all (with its rounded top and bottom and even sides while appearing very much rectangular). It has adjustable power. The 3 pre-defined settings are 17, 20 and 22W. So, it’s no slouch.
But to be honest, if youre an MTL vaper or want to quit smoking, we’re not sure you should buy this. If you’re a Kdest fan, maybe? 😀
In all seriousness, it doesn’t have airflow control and while 1.2ohm coils will be available, only the 0.6ohm ones (2 of them) will be provided in the packaging. Which means, since it doesn’t have an adjustable airflow, it may not be possible to use the Kdest for Mouth To Lung vaping without purchasing additional coils.
So, you may want to wait for a review (we don’t think we’ll make one, but we’ll update this section by embedding a video review when and if we find a good one) to make a decision on this one.
But for DTL vapers who hate planned obsolesce and/or like the convenience of being able to swap batteries when the Kdest Armor battery is empty, it could be a nice mini-device to have.
Plus, it’s only $18.90. So, no big risk taken by trying it out.
You be the judge.
We chose our next new “MTL” best vape kit of the week solely because of its design. It’s the VEIIK Cracker Kit/Pod System.
The name of the VEIIK Cracker Pod kit is, you guessed it, evocative of the salty biscuits of the same name. The shape of the VEIIK Cracker Pod kit is kinda, vaguely, similar to one. Well, it’s a small square and… that’s about as far as the comparison goes.
But cracker or not, we find its design to be quite nice.
It’s tiny (54 x 45 x 13.2mm. So about 2 by 2inch and ½ an inch in thickness) and colorful. Plus, most of the VEIIK Cracker Pod kit models (some should be covered with PU but we didn’t see them up for pre-order) are covered with 2.5D tempered glass panels that probably will make it a bit more fragile than your run-of-the-mill Pod System, but they will surely and also make it look even better in person.
Glass is the new trend, guys. We may not like it, but it’s the way it is now.
Though, the VEIIK Cracker is cheap enough that it shouldn’t be too much of a concern.
[NB: We really wonder who’s the genius who thought that it was a good idea to call a vaping device made of glass the… Cracker. LOL].
Also, you can always decide to not buy into this new trend and prefer purchasing a vaping gadget you won’t have to take extra care of. And if you had to pick and choose only one device to be your daily driver, you’d be absolutely right.
Still, some of these new glass-made devices seem well-built and resistant enough. Like the iJoy Neptune Pod System we just received and of which we’ll post a review soon. It’s made out of toughened 2.5D curved glass –front and back– and it seems it can last. More on this and on its performance in our next review.
Coming back to our VEIIK Cracker kit, while it’s announced on some places as an All in One, it’s definitely a Pod System. The coils aren’t replaceable. When you get less or bad flavors, you need to change the whole pod.
It sports 1.2ohm ceramic coils, by the way. So, in theory, the VEIIK Cracker should be suitable for Mouth To Lung Vaping. But, in actuality, not really.
This one is for those of you who like a looser draw. Its airflow will create a loose MTL or tight DTL draw, similar to a Caliburn.
So, not tight enough for us (we won’t make a whole review for it), but maybe perfect for you.
Though, because of its airflow, that’s not the kind of device we’ll recommend to a smoker who wants to quit.
When someone is trying to quit, and unless s/he knows for a fact s/he prefers and wants a loose draw or even a Direct To Lung one (Hookah style) of course, we recommend a device which draw is the closest to a cigarette as possible. Maybe a little smoother for more vaping comfort, but that’s it. Otherwise, the experience may not be enjoyable and can be discouraging.
The VEIIK Cracker Pod Kit comes with 500mAh built-in battery and 2ml e-juice pod capacity and it has a 8-15W wattage range.
VEIIK Cracker Pod Kit extra FEATURES
The VEIIK Craker Pod Kit Packaging:
That’s it for our New MTL best vape kits of the week report. We hope that you/ve found it somewhat interesting 😀.
If you want to have a look at more great new/recently launched devices, you can check out our MTL Vaping News section and start from there.
And Share, Share, Share. 😉